wireless networking - Configure my Wifi Router (TP-Link w8968) as a client to my mobile hotspot

07
2014-07
  • Questioner

    I want to access my mobile hotspot of 3G smartphone (AP) through my wifi router which will share the connection over wired devices (PC, Laptop etc.) attached to its port(s).

    • Answers
    Know someone who can answer? Share a link to this question via email, Google+, Twitter, or Facebook.

    Related Question

    wireless networking - Improve and boost the wifi connection to public hotspots
  • OverTheRainbow

    Are there software and/or hardware solutions that I could use to increase the wireless reception (to strengthen signal, reduce connection losses, etc.) to public hotspots?

    I use a Trendnet TEW-444UB USB key on my XPSP3 laptop to connect to wifi hotspots using the default XP utility.


    • Related Answers
  • Axxmasterr

    Some devices allow you to connect an external antenna to your wireless device. If you can do this, that is the "Low hanging fruit" method I would recommend. There are many types of antennas so you will have to choose based on exactly how you would like to boost your performance. Typically most antennas in these types of devices are omnidirectional and that is usually appropriate under most circumstances. A directional antenna can provide a much stronger signal from a distance but requires alignment to the wireless device it is connecting to.

    Another method you might try is to figure out where the receiver is on the USB device and fashion a parabolic focuser that will capture the signal and focus it on the receiver in a similar manner as a satellite dish or directv setup. The parabola need not be huge. You are just trying to create a reflector that collects EMI from the right direction and also reflects everything you transmit in the wrong direction back at the device you are trying to connect through.

    Hope this helps.