printer - Different dpi printhead for Zebra 110XiIII Plus from 200dpi to 300dpi

07
2014-07
  • jonshlim

    Recently we purchased a 300dpi printhead for our original 200dpi Zebra 110XiIII Plus. Somehow even with 300dpi driver, the printout result is still 33% smaller. Is the printhead swappable to different dpi or we need to some other part? Thanks.

    • Answers
    Know someone who can answer? Share a link to this question via email, Google+, Twitter, or Facebook.

    Related Question

    How to solve Zebra printer alignment issue?
  • Brian Knoblauch

    I built a JSF app back a few months ago that prints on a label printer. We had a demo unit from the manufacturer at the time and everything worked perfect. Shipped the demo printer back, finally received our production units, and it no longer aligns properly. The image I'm sending is getting shifted "down" the label about an inch

    I verified that the margins are all zero in the printer setup. Label size is right in printer setup. Really nothing has changed on the Glassfish server (which prints directly to the printer). What else should I be looking at?


    • Related Answers
  • Brian Knoblauch

    Well, I had been inserting the paper roll (with built in cardboard tube) directly (not using the Zebra tube) as per the instructions. When I put the Zebra tube inside the built in tube and used it that way, the alignment came into place. Makes no sense to me, but that's what did it!