windows 7 - My microphone is too quiet (seems to be connected with Skype)

02
2013-08
  • AmitM9S6

    I've been chatting with skype for a long time.. and I don't know why, but for X time it's fine, and then it's too quiet..

    Here how it goes :

    I'm booting the PC -> getting into a skype call with friends -> talking with friends on skype -> (everything goes well) -> Closing the skype call -> Going back to a skype call like a hour after -. They can't hear me well, I have to shout so they'll hear me, and in the settings, it's on 100% + 30 DECIBELS, so I can't raise it higher...

    and if I'll re-boot my PC, it'll be well until I'll close the skype call again..

    Every time I'm skyping with friends well, and then when I close the call and come back after a while, they hear me really low(volume)..

    I've been trying to fix this problem for about 2 months! If you'll be able to help me, I'd be so happy.

    (btw It's connected not through USB, but through a microphone connection and headphone connection...) Also, I got Windows 7..

    • Answers
  • Nicholas

    Try to reinstall Skype(i had similar problem, after i close Skype or end the call all my settings go on default, which i found later). Try to put installation path to another partition/folder and see if problem persist.

    I see that you tried other mics on your computer and all of them get same problem ?

    Try to update drivers for your sound card.... if you have latest driver i hope that reinstall will solve the problem!


    • Related Question

    audio - Skype for Linux: Microphone works 50% of the time per SkypeOut call
  • Neil

    I have Skype 2.0.0.13 for Linux, and whenever I make a SkypeOut call to a phone, sometimes the microphone works, and sometimes it doesn't. It's completely random, and it's about 50% either way. By that I mean there's a 50% chance of the mic working every time you make a call, so restarting the program doesn't affect anything.

    Every other application that uses the microphone works fine. My guess would be that Skype is switching between microphone configurations for some reason. It's very hard to search for this problem, of course, because there's no consistent way to describe it.

    I'm running Ubuntu 9.04.

    I have a Sound Blaster Live 5.1 running the emu10k1 driver.

    Skype's "Sound In" is configured as: SB Live 5.1 SB0220 (hw:Live,2)

    I've also killed pulseaudio, which has been known to cause sound problems, and it didn't help.

    Has anyone else encountered this problem?

    Here's the cross-post to the Skype forum.


    • Related Answers
  • Avery Payne

    It sounds like you've run into a pulseaudio issue.

    Pulseaudio is a great idea turned into a great program. Unfortuantely, its release version is still under 1.0 for a reason - there are the occasional kinks to work out.

    First, I'd install the traditional pulseaudio manager. Yeah, it will cruft up your audio sub-menu a bit but it helps tremendously when diagnosing problems.

    sudo apt-get install paman

    After you get it installed, launch Skype and determine if it shows up as a client. If it doesn't then it simply isn't connecting properly.

    Do you have a second sound card, like an on-board chipset, in conjunction with your SB card? I've seen cases where pulseaudio will become confused (I have an nForce2 and an older SB PCI card, and it wouldn't work properly until I removed the SB and used the on-board audio with nForce2).

    EDIT:

    I suspect that you are using the wrong "input". Pulseaudio sometimes provides multiple input sources if you have ALSA, OSS, and ESD available all at once. Try switching through each input, placing a loopback call each time and recording your voice twice. If you hit one that consistently records 100% of the time, that's the issue.

  • Axxmasterr

    I have had this problem but in my case it was an intermittent microphone cable. As the cable flexes over its service life, the stranded copper wire begins to become inflexible until there are specific points and angles where the wire will not make connection. This can be very frustrating because it is not always easy to replicate the problem at will until the cable gets really worn.

    just my $0.02