networking - Verizon FiOS gateway routing issue - How to set up VPN?

06
2014-04
  • roybatty

    OK, long story as short as I can make it:

    • Kept having 'waiting for server' issues when going online via browser or FTP
    • Reset router, etc. - same issue
    • Tried Google DNS & OpenDNS - same issue
    • Contacted ISP & sent a traceroute
    • Traceroute showed issues at the 7th and 12-13th hops
    • ISP said it's not their issue - issue is apparently that "certain sites rent bandwidth from that gateway and if traffic exceeds that then that is where you start to see those issues. Unfortunately we have no control over this issue"
    • ISP advised using a proxy or VPN (I'm not too keen in this area)
    • Researched proxies - seemed kinda sketchy security-wise
    • ISP said VPN was best bet but couldn't advise further

    I understand that the only way to change my routing to a specific destination is via VPN or proxy.
    How can I set up a VPN to fix my issue? I'm assuming I would need to set up my own VPN server at home? Can this be done on the FiOS router directly (MI424WR) or do I need additional hardware to set this up? I'm using OS X 10.9.

    • Answers
  • Spiff

    You wouldn't need a VPN server at home, just a VPN client.

    It seems like Verizon's telling you that their only route to that site is crappy, so if you want to get to that site, you'll have to get to it from somewhere else on the Internet that doesn't go through the same crappy route that Verizon is sending your traffic through.

    So you need to fire up a VPN client on your Mac, and VPN into a VPN server somewhere else. Make sure you've set things up so that the route(s) for that website's IP address(es) go through the VPN (some VPN clients let you check a box that says "Send all traffic through VPN").

    If you don't currently have access to a VPN server somewhere else, there are online VPN services you can pay for.

    If you like the VPN solution, you could look at getting your home gateway router to act as your VPN client, but I don't think the Verizon FiOS (actually Actiontec) MI424WR factory firmware supports that. You can double-check that yourself via your router's web admin interface. It may be that you can find aftermarket open source firmware for your router (like DD-WRT, OpenWrt, Tomato, etc.) that supports your router and adds this feature. Or you could buy a home gateway router with built-in VPN client support. There are SOHO/telecommuter-focused gateways that make a big deal of their VPN client support.


    • Related Question

    internet - Why did Verizon hook FIOS up with ethernet and coax?
  • Bob

    Verizon installed their FIOS router in my apartment a year ago and hooked up both the Ethernet and coax connections on the back of the router.

    I am moving my routers around and I don't have a coax outlet where I would like to place the router. I tried connecting only the Ethernet and to my surprise it works fine. Do I need the coax connection, what does it do?

    If it truly isn't needed I am considering returning their router to avoid the equipment charge and just using my own router (I haven't tested if this will work just yet). Would there be any reason to keep renting their router?


    • Related Answers
  • Sidnicious

    If you have FiOS TV, that coax cable is providing network access to your set-top boxes.

    Without it, they'll lose their channel guides, won't be able to access on-demand programming, and won't install firmware updates. They should continue to function as dumb cable boxes.